Solar Lamp – Butterfly wall lamp – Solar energy – Atalanta
A sustainable light source is now a known fact in and around every household. The Butterfly Solar Lamps are a unique addition to that offer. These lamps are one with nature in two ways: in shape and in use. You no longer need electricity or batteries to illuminate the area around your house or building. Let nature lend you a hand.
Not only the shape of this lamp is reminiscent of a butterfly, the design also has the unique appearance of the flying insect. The lamp also owes its name to the light effect that resembles a butterfly. The butterfly effect is caused by the light from the left, right and below. As if the lamp on the wall moves.
On one side, the butterfly lamp is equipped with a solar panel. This is where the energy needed to make the underside shine is captured. A solar lamp in optima forma.
Sustainable wall lamp
- Modern design LED wall lamp provides lighting around the house
- Solar panel on the lamp provides the necessary energy: light makes light!
- Available in two different sizes (and strengths)
- Including motion sensors for extra sustainable use
- Durable wall lamp for around the house
The lamp charges during the day and extracts the maximum power from the sun's rays that are collected. This also happens when the sun shines behind the clouds. Then the lamp itself shines at night when someone walks by, or if other movement is detected. That makes the solar lamp even more efficient, you have light when you need it.
The Butterfly Solar Lamp is available in two different sizes and strengths. Choose the compact Geisha (1.5W and 220lm) or the larger Atalanta (4W and 500lm). Both are IP65 Waterproof. So on a rainy day you don't have to worry about the solar panel being unable to digest the precipitation.
The ideal installation height for the lamp in sunlight is estimated at 2 to 4 meters, depending on the location of the lamp. Choose a place where you can use the light well. The power of the LED lights will amaze you: this butterfly shines.
Working mode Atalanta
The Solar Lamp Atalanta has two working modes. Mode A: When the battery percentage is higher than thirty percent, the lamp automatically lights up to full brightness when motion is detected within 6 meters. The lamp then dims to 3 percent strength (front and rear light on) after 20 seconds without movement. If the battery percentage is below 30 percent, the lamp will light up to full brightness if motion is detected within 6 meters. The lamp then dims to 3 percent strength (front light off, rear light on) after 20 seconds without movement.
Mode B: The lamp lights up automatically when the sun has set (<30 LUX) and remains at 50 percent brightness. After 5 hours or when the battery percentage has dropped below 30 percent, the lamp switches to energy saving mode. Then the lamp automatically switches to 50 percent strength if movement is detected within 6 meters. Then the light dims to a lower strength (front light off, rear light on) after 20 seconds of no movement. Use the switch button to switch between modes. Press once and the rear light flashes once: mode A. Press again and the rear light flashes twice: mode B. Press a third time and the lamp turns off.
Specifications Atalanta outdoor lamp:
- Power: 4W
- Lumen: 500lm
- LED: 56x SMD2835 (front 54, rear 2)
- Dimensions: 211 x 140 x 115 mm
- Waterproof type: IP65
- Material: ABS+PC, anti-UV
- Solar panel: 0.7 Wp, mono-crystalline silicone
- Beam angle: 90 degrees
- Working time: Depending on mode (>35 hours)
- Burn time after detection: 20 seconds
- Package Contents: Solar Lamp, Manual, Measuring Tool, Accessories
Reviews
There are no reviews yet.